Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
(457 reviews)
Price: $13.42
In Stock
Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
Item # 166079
Our Price: $13.42
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (457)
- Q & A (0)
- Videos (1)
- Photos
ABS Fasteners Trailer Suspension Parts - 166079
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 3-1/2 Inch Long
- 9/16 Inch Diameter
- ABS Fasteners
9/16" Diameter spring-retainer bolt is used to mount slipper spring inside front hanger. Includes locknut.
Features:
- Suspension bolt attaches leaf spring to front hanger
- Included locknut secures in place on bolt
Specs:
- Diameter: 9/16"
- Length: 3-1/2"
166079 Spring Eye Bolt with Nut - 3-1/2" Long
91635B
Video of Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at the 9/16th diameter, 3 1/2 inch long spring eye bolt with the lock nut for slipper springs. Now this 9/16th diameter spring retainer bolt is used to secure the slipper spring to the front hanger of your slipper spring trailer suspension. The 3 1/2 inch long bolt is common on trailers that have a 6,000 pound or 7,000 pound axle and uses 2 inch wide leaf springs.Now, the bolt itself is a grade five bolt. The way we can tell that is, if you look at the head, you'll see three lines on it.
That'll indicate that that meets the grade five designation. The length on this is 3 1/2 inches, and that's measured from under the head to the end of the bolt, so there's your 3 1/2 inch length. Diameter of this bolt is 9/16th of an inch. The thread size on the end here that the lug nut or the block nut attaches to is 9/16th by 18 threads per inch. Now the bolt head size is a 13/16th of an inch, and let's show you here's a 13/16 socket.
Oops, wrong one. Here's the 13/16 size socket. You can see it fits securely on there.And the lug nut size uses the 7/8th inch size socket, and that's the first one here I pulled. And you can see that fits exactly on there. And this included lock nut is what will secure this bolt to the spring eye.
But that should do it for the review on the 9/16th diameter, 3 1/2 inch long spring eye bolt with the lock nut for slipper springs.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Defective
Customer Reviews
Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long - 166079
Average Customer Rating: 4.8 out of 5 stars (457 Customer Reviews)
9/16" Diameter spring-retainer bolt is used to mount slipper spring inside front hanger. Includes locknut.by: Keith 12/18/2023
When I asked questions about my order they answered back quickly. Everything fit like it should. Yes time will tell if the springs are good.
by: Vania10/07/2022
Just what needed for my trailer. My old leaf springs were so rusted that I was one pot hole away from being broken down on the side of the road. These new ones are perfect.
by: Joe V. 06/11/2013
Great Experience!
When I noticed that the leaf springs on my 44 year old boat
trailer had cracked I thought I would never find replacements.
I fully expected to have to have something custom built.
I was amazed when I found the fantastic diagrams/descriptions
dimensions for replacement springs on etrailer.com
The phone support person was wonderfully helpful in confirming
if items were in stock and ready to ship. The replacement springs
arrived on time and everything bolted up perfectly!
Thanks for such a great site!
by: Paul 04/26/2024
Everything was as expected! Products are as described and the shipping was fast! Thanks! I will buy from them again
by: Ray01/14/2021
I will be disassembling and do a further visual coming up. But what I did see while on the trip is that it definitely looks as the rollers (gold colored like a grade 5 - 8 bolt, I'm assuming they are hardened) that are in the system to roll on the slipper springs are showing wear.
by: David11/29/2018
I have bought many different products from Etrailer and the staff have been more than helpful and I would recommend this company.
by: Ryan 11/18/2023
Bolt was a great replacement
by: Donald08/24/2023
Two of the bolts were sent as the wrong size...they were properly labeled, but were 9/16 instead on 1/2. Kylie requested photos of the bolts to "prove" they were incorrect which kind of frustrated me further. She is sending new ones to me soon. One of the hub kits arrived with the seal broken and the contents were scattered in the shipping box, but all the parts from the kit were there, so no harm done.
by: Matt04/09/2021
Great products from e trailer. They work as expected and hassle free. Even better prices.
Matt
4/10/2022
The trailer springs and brackets have been great no issues at all. Very pleased with etrailer products.
by: Dan 05/03/2024
Awesome product and fast shipping!
by: George05/03/2024
It's 4 in long and no shoulder.
by: Cody 04/04/2024
Great company to do business with and very knowledgeable assistants! Recommended
by: Robert H.06/09/2017
I have purchased a number of items from etrailer.com such ans leaf springs, axle and hub assembly, and other items as well, I recently finished the trailer and it is now on a cross country trip. The trailer has just finished a 3,000 mile leg of this trip and I am told it was so smooth that it could not be felt by the towing vehicle.
Every product I have ordered from etrailer.com has been top quality and has worked extremely well. I would come back again for any of my future trailer needs.
Robert H.
6/27/2018
The trailer has since been on a second cross country trip and it is still working just like it was the day I finished it.
by: Sebastien04/23/2023
Quick delivery and product as described
by: Fred12/21/2020
Super service getting all the right parts. I received the parts in just two days it took about one hour to change both springs .everything fit grate back on the road.thanks
by: Charles 09/26/2023
Very good service and very good parts as usual!
by: Joe C07/12/2021
Customer Service was / is excellent. Timely delivery easy ordering process. Correct parts and easy to install Great Company and would use again when I need to
by: Bill12/22/2023
Right size
by: Ed08/21/2023
I get the correct hardware every time!
by: Joseph 11/01/2023
worked as advertised.
by: Dale09/29/2022
I received the order to late to use before my road trip.In total, it took 27 days to receive my order. I placed my order on September 1st and received the package on the 8th. Whomever packaged the order used a very larger box and three sheets of packaging paper. By the time I received the order it was missing half of the items I ordered. I emailed etrailer immediately and received a response quickly. I was told that a replacement order was sent to their warehouse or shipping department and they would send the replacement parts. However, this is where things started to brake down. I asked for a projected delivery date and i was told that it usually takes 3 to 5 days once it ships and they would send me an update once it shipped. On the 14th I still had not received an email stating the order had shipped so I emailed etrailer again. I left on my road trip on the 15th so did not have the time to check my emails until the 19th, and found I had not receive a reply yet so i sent another email. The response I received stated that they had sent me an email on the 14th to notify me that one of the missing items from my original order is now back ordered. I reviewed my email inbox and junk mail on three devices that receive all mail sent to my email address. I did not receive an email from etrailer as stated. Bottom line, i didn't receive the replacement items until the 27th. This put me on the road without the trailer parts I was counting on for my trip. I'm not a satisfied customer.
by: Fred 01/25/2023
Melissa @ eTrailer was simply the best. She took the time to confirm the leaf springs were the correct size for a trailer I am rebuilding. Received the parts on time. Could not have done better with any other company.
by: Loretta 09/01/2023
The chat option helped with finding the items we needed. Loved the online videos. Item shipped promptly with great communication. Excellent customer service.
by: Patrick04/16/2020
The original spring bolts were 1/2" these are 9/16" and I had to enlarge mounting bracket holes but satisfied with these stronger bolts. The springs and all other hardware high quality at a very good price.
Patrick M.
4/17/2021
Great. Quiet, firm ride. Handles great.
by: Matt 02/25/2023
Best site for trailer parts
Everything you would need
25
457
Show More Reviews
See what our Experts say about this ABS Fasteners Trailer Suspension Parts
- Replacement Suspension Components for 6,000 Lb Axles with 25-1/4 Inch Long Leaf SpringsThanks for the photo! I have everything you need to get your trailer back on the road. I have attached my recommendations on the following parts for you trailer as well as the quantities needed. Leaf Springs: part # e34SR (4) Equalizers: part # TREQ310 (2) Shackle Straps: part # 115208GALV (8) U-Bolts: part # APUBR-8 (2) Eye Bolts: part # 166079 (12) I have also attached a few review videos on the above products for you as well.
view full answer...
- Correct Track Alignment Replacement Hanger Bolt RecommendationWhat you'd want is the replacement suspension bolt part # 166079. This is 9/16 inch in diameter like you need and is 3-1/2 inches long too. It comes with matching nut as well.
view full answer...
- Recommended Slipper Spring for Custom Kayak TrailerThanks for the photos with measurements. The 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long # SP-177275 are rated for 500lbs each for use with a 1000K axle. This will work with the inside to inside measurement you are seeking. You will simply need the 9/16 inch bolt # 166079. If there is any extra space in the hanger it won't be an issue with the bolt and bushing.
view full answer...
- 12 Inch Slipper Spring Equalizer Kit RecommendationThe only 12 inch slipper spring equalizer we offer is the part # E4541-Z. For shackle bolts you would need the part # 166079, for equalizer bolts you would need # TRFA71063, cotter pin part # 165649, and for spring keeper bolts part # 7-7. We do not have all of this in a kit though.
view full answer... - What Type of Bushing Comes with 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer AxlesThe bushing that comes with the 4-Leaf Slipper Spring # SP-179275 is a nylon bushing like part # TRBU11566 so you need a standard non-grease bolt like part # 166079 for the installation. The nylon bushings are pressed in there by themselves without any specific type of sleeve.
view full answer... - Does Hitch Bolt 166097 Fit Slipper Spring part # e29SRYes the spring eye bolt part # 166079 does fit with the slipper spring part # e29SR that you referenced.
view full answer... - Where is the Length of the Bolt part # 166079 MeasuredThe 3-1/2 inch length of the bolt part # 166079 is measure from below the head of the bolt to the end of it. Based on what you mentioned this should work well for you.
view full answer... - Hanger Bolt Recommendation for a 3-Leaf Slipper Spring # WIE3You need to use a 9/16 inch bolt for the front eye of the 3-Leaf Slipper Spring that your referenced part # SP-178275. For that I would recommend the Spring Eye Bolt with Lock Nut part # 166079. The correct rear hanger is part # 115706S if it's a single axle trailer. Since the spring does not have an eye on the back of it you do not need to match a 9/16 inch bolt to anything.
view full answer... - Recommended Bolt On Hangers For Aluminum Frame TrailerSince you've got an aluminum frame trailer, I understand why you're looking for a bolt on solution. The only available bolt on hangers we have available would be the # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR you were looking at. If you went this route you would want to use something like the # SP-040275 as your springs, which have a 3700-lbs capacity. This would be the best solution available for your new aluminum trailer,...
view full answer... - Replacement Trailer Suspension Parts for Trailer with 2 Square AxleIt looks like you've got a pretty good grasp on all of this and thank you for the detailed information; it looks like most of the parts you've mentioned will work for you. For the leaf springs, the 26" long # e27SR will be the best option for you since springs stretch out over time and they're right around the capacity of what the axles likely is. The next closest size would be the 25-1/8" # e54SR, but I would be hard pressed to believe that your old ones have stretched out over a full...
view full answer...
- Bolt Recommendations for a Equalizer for 2 inch Slipper SpringsFor the Equalizer for 2 inch Wide Slipper Springs # TREQ1344 you will want to use a Wet Equalizer Bolt with Castle Nut and Grease Zerk # TRFA71063 for the center bolt hole. This bolt has a grease (zerk) fitting. For the side bolt hole that the spring will mount to you will want to use a Spring-Eye Bolt with Locknut # 166079. For a keeper bolt you would want a Leaf Spring Center Tie Bolt with Nut # 38-4TB. I attached an FAQ article on slipper spring suspension setups for you to check out also.
view full answer... - Bolts Needed To Install Slipper SpringsFor the spring eye you would use the Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long # 166079, but slipper springs don't have the second spring eye, so a bolt is not used on the back end. You can also use a wet bolt like # 126B2, for less friction. The Shackle Bolt with Locknut for Double-Eye Springs - 3" Long # 166081 are for use with the spring and shackle straps used with a shackle straps on a tandem setup with an equalizer but it could be used for the springs and the...
view full answer... - 9/16 inch Diameter Shackle Bolt Longer than 3 inches AvailabilityWe have the # 166079 which is a 9/16 inch diameter shackle bolt like you need that measures 3-1/2 inches in length.
view full answer... - Shackle Bolt With Nut For 3 Inch, 3-1/2 Inch, And 3-5/8 Inch LengthShackle Bolt with Locknut for Double-Eye Springs - 3" Long, # 166081 and Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long # 166079 both come with a nut. The Step Wet Bolt for 1-3/4" Double Eye Springs # 34007-187-00 does not come with the nut, however we have confirmed a fit with nut # 192600
view full answer... - Do Slipper Springs Come With Suspension BoltsSlipper springs like the # SP-177275 and # SP-179275 include the nylon bushings but do not come with a spring-eye bolt. Both of these use a 9/16" diameter bolt so you can use the # 166079 for a bolt and locknut.
view full answer... - Will Reducing The Number Of Leaves On A Spring Effect Ride Height/Fender Clearance?Yes, reducing the number of leaves on your leaf springs will lower your ride height and reduce your fender clearance. Lets say for example that the current spring has 9 leaves, and each leaf is 1/4" thick. So the whole spring is 2.25" thick in the middle. Say we replace that with a 5 leaf spring with 1/4" thick leaves. This spring would be only 1.25" thick and we would have lowered the deck of the trailer by 1". If you are looking to replace your springs, we should have options for you....
view full answer... - Recommended 30 Inch Slipper Springs and 2 Inch Square Axle Mounting KitFor your 2,000 lb square axle, I recommend the 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long # SP-039275 which is a little stronger than your axle but won't increase your capacity of 2,000 lbs. This is a 30 inch long slipper spring with a 1.75 inch width as you stated. I recommend using the Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long # 166079 with each spring. For your square axle mounting, I recommend the CE Smith U-Bolt Kit for Mounting...
view full answer... - Comparing Lippert Never-Fail Bushings to the Bronze Bushings and Wet Bolt Option for Tandem AxlesThe bronze bushings and wet bolts are a great option but they still do require maintenance especially under the conditions you referenced. There really isn't any new information in comparing it is basically the difference between maintenance required and zero maintenance. The Never-Fail bushings # LC279685 are maintenance free and self-lubricating so they will be a better fit for you. This kit comes with the bushings for 4 springs and two equalizers for a complete tandem axle trailer....
view full answer... - Are there Bolt-On Hangers for Trailer Leaf Spring SuspensionWe do have a couple of bolt-on spring hangers # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR. Its not likely that professional welder would charge that much. You might be able to find one locally via an iron workers union near you. For u-bolts for your 1-1/2 inch square axle you can use # SP01-120 for 2 u-bolts and 4 nuts. For a u-bolt plate you can use # 115983. For a hanger kit you could use # APS1. Now what you could do is...
view full answer... - Can You Get etrailer Suspension Kit E99ZR without Hangers?No problem! It's not all going to be as a kit but you'll need the following part's and quantities: (2) Equalizers # TREQE1 (8) Shackle Straps # TRSL313 (14) Bolts # 166079
view full answer... - Correct Bushing and Bolt for 4-Leaf Slipper Spring # e33SRThe 4-Leaf Slipper Spring # e33SR that you referenced actually comes included with the nylon bushing but if a replacement is needed then the 9/16 inch # TRBU11561 that you mentioned would be the correct size and will work perfectly. The correct bolt for this setup is the Redline Spring-Eye Bolt # 166079 that features a 9/16 inch diameter and 3-1/2 inch length.
view full answer... - Axle Spacing When Using Slipper Spring Equalizer Kit # APT6SE with 26 inch Long Leaf SpringsBased on your leaf spring length the axle spacing you'd have with the hanger kit part # APT6SE would be right at 33 inches. This kit is designed for use with 9/16 inch bolts like the # 166079 and we would not recommend drilling out the kit to fit a wider bolt.
view full answer... - What Are the Dimensions of the Spring-Eye Bolt with Locknut for Slipper SpringsThe Spring-Eye Bolt with Locknut for Slipper Springs # 166079 is a total of 3-1/2" long. The measurement from the back of the head to the start of the threads is 2-3/4" and the length of the threads are 3/4".
view full answer...
- Replacement Slipper Leaf Spring for Triton PWC TrailerThe best slipper spring option for your Triton PWC trailer is going to be the Slipper Spring part # SP-039275 as it's for up to a 2,900 lb axle, is a 3-leaf setup, and is 1-3/4 inches wide. It does have a flat end though and not a radiused end but that shouldn't be an issue.
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Installed by:
Jeff D
Installed by:
Randy B
Expert Research:
Jameson C
Video by:
Kathleen M
Updated by:
Wilson B
Updated by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David
11/30/2019
It’s been a year already! How time flies. Every things still working great thanks again.